THE NAMING RULES OF RF COAXIAL CONNECTOR
 
  from: time: 2007-03-13 Click rate: 9874
 
   TYpe nAMING RULES OF RF COAXIAL CONNECTOR
Type Naming
The type of RF connector is made up of main symbol and structural symbol. Part with "-".
Main Symbol
Main symbol of RF connector use international universal main symbol. The naming rules of different structural product concretely are prescribed by detailed criterion.
Structural Symbol
Structural symbol of RF connector is in table 1: characteristics
Table 1 Structure Format Classification & Symbol
● Sample for model composing of RF connector
Example 1: MCX-JW3
Means type MCX curly RF plug, inside conductor is pin, match SYV-50-3, RG58/U RF cable.
Example 2: BNC-KWE
Means type BNC right angle RF socket which is welded in PCB and 50 resistance.
● Naming and composing example for adaptor & resistance transformer
Model of adaptor & resistance transformer base on that of plug or socket. Main symbol of adaptor model is marked with connector-main-symbol (inter-series) or factionary from (between series).
Example 1: SMA-50JK
Means type SMA 50 series adaptor. One port is positive contact part, another is negative contact part.
Example 2: BNC/SMA-50JK
Means the adaptor which one port is BNC positive contact part, another port is SMA negative contact part, resistance is 50Ω.
● Denoting model of impedance transformer
Example: N-50J/75K
Means type N impedance transformer contact which one port is 50Ω positive contact part, another port is 75Ω negative contact part.