RF coaxial cable connector fittings Rules
 
  from: time: 2007-03-13 Click rate: 6790
 
  
    RF coaxial cable connector fittings rule a rule, the General Principles of RF coaxial connectors installed cables in general, steps, the use of tools and items applicable to matching soft and semi-rigid cable RF cable connectors. 2 fittings tools 2. A soft pressure cable companies access tool for the cable supporting the soft pressure can be jaw pressure then received 10.5 mm diameter 2.5~ Soft cable, applicable to the above various cable RF coaxial connectors. 2. Two loaded semi-rigid cable access tool loaded semi-rigid cable access tool in SMA RF coaxial connector fittings SFT-50 2 (RG405/U) and SFT-50-3 (RG402/U) semi-rigid cables, other types of RF coaxial connectors installed semi-rigid cable access when using the above tool. Three access methods and equipment 3.1 steps soft cable fittings A method. Wire : product drawings by the size of wire used Wire strippers tool blades or wire may, but not damaged cable lines, and internal and external insulation layer shielding layer. B. Welding inner conductor : loaded clip and retaining line sets with the melting point of +125 ° C above the solder will be welded to the inner conductor cable line. Take care not to burn cable insulation layer. C. Pressured outer conductor : The pressure will then clamp Clamps compressing the six-party talks, so that shielded cables with the outer conductor good contacts. D. Installed thermal management : hairdryer blowing hot air gun uniform, depending on the thermal management can be tightened. 3.2 semi-rigid cable fittings A method and the steps. Wire : drawings by the rules and wire size, or the exclusive use of lathe tool wire. B. Solder : melting point should be used to +150 ° C above the solder welding outer conductor, melting point above +125 ° C solder welding inner conductor. 4 items fittings good cable assemblies should do contact resistance, insulation resistance, dielectric voltage test. These projects requirements and test methods as detailed in the product specification or standard (see Product Catalog indicators various technical products Properties).